Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they don't rust or rot.

It is crucial to wash and oil UPVC windows and doors regularly. This will help avoid unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge amount of damage to your home, which can make it extremely dangerous and possibly fatal. You should take the time to ensure that your windows are in good shape.

For single pane windows, it can be relatively simple to replace windows, and the new one will generally fit within the old frame very easily. If you have double-paned windows that are held together by internal beading, it is harder to remove and replace the panes that were previously in use. In this case you'll need to source some plastic spacers that help the new pane to fit properly into the window frame.

If you're planning to try to remove the window panes by yourself it is crucial to wear appropriate safety gear such as gloves that are thick and protective eyewear. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall onto the fabric and not onto the floor and could be trampled.

After the glass has been removed from the window, it's best to seal the gap with packaging tape or duct tape to block water and drafts from getting into the home until a professional can come out and fix the window. It also acts as a barrier, deterring any intruders from getting access into your home. If the distance between the door and the window is significant, you may want to use an alarm system that has windows. This will provide the best of both.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber sash windows. As time passes, they may develop a variety of issues that include sagging. A sagging uPVC window can cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it's crucial to act fast to prevent the problem from worsening.

To fix a sagging window you can try repositioning the hinges. To do this, you'll have to open the window so that you can get to the frame. Then, using an screwdriver, unscrew the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you have repositioned your hinges. If you are happy with the fit of your window, you can tighten screws to hold them in the right position.

If you are unable to reposition the hinges, you might need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, leading them to loosen. It is important to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles may also become loose. This is usually due to screws that have been removed over time, but it can be due to the handle mechanism wearing out. It's relatively simple to repair a loose uPVC handle. The first step is to close the window and perform an initial test to ensure that it fits. The joint at the corner of the sash should be aligned with the joint on the casing. If it doesn't then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

It is crucial to act if you get up each morning to find a smoky wall and wet floors. Water leaks from windows can not only cause destruction of your home's structure but also hamper your efforts to control the temperature within your home. The most common cause for leaks in uPVC windows is that the sealant around the frame is damaged or not present.

This is a simple fix that can be done by any DIYer who is competent. Depending on how serious the problem is, the old caulking might need to be removed. When it is time to uPVC repair, it is important to avoid over-caulking. This can make your window harder to clean and lower its energy efficiency.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more serious situations, you might need to consider replacing the window.

Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. The fungus thrives in damp conditions and can spread quickly throughout the home.

If the leakage is occurring between the double glazed windows repairs-glazed glass it is more likely that the issue is more related to the seal, not the frame. This can be easily repaired by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and blow open with ease it could be the hinges that are at the fault. Anyone with the skills to fix them can replace hinges in just a few minutes.

Like any mechanical component, hinges can be damaged over time. It is very easy to change the hinges on a window however it is easier if someone else helps you to hold the frame.

Check that the uPVC hinges are closed and open in the right direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The issue could be caused due to opening the window in the wrong way or due to a poor installation at the factory. This issue can be fixed by sending us a picture via our website and we will be happy to give you suggestions.

Regular lubrication of the hinges is also necessary. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also stop corrosion and Repairs to uPVC Windows reduce the possibility of sticking. This should be done at least every year. WD40 and other solvent-based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different things. First, the hinges due to wear and tear may become displaced, which will cause gaps to develop between the sash and the frame. If they are beyond repair, it may be necessary to get them re-aligned. The interlock may be disaligned. It is located on the hinge's side and may need to be cleaned. In certain instances it might be necessary to replace the hinges.

The seals may wear out or become damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping can help prevent draughts. Replace the upvc windows with low-emissivity lenses. This will help regulate indoor temperatures and decrease draughts.

The last way to reduce drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler that can be hung over your window sill. They can help block out cold air and keep your home warm and cosy!

With a bit of regular maintenance and repairs windows made of upvc will continue to provide an excellent level of security and insulation for your home. It is crucial to keep in mind that all windows will eventually become worn out, and it is cheaper to replace them instead of fixing them. If you encounter any issues with your Upvc window you should consult an expert as soon as possible.